martes, abril 05, 2005
¿Que puertos abrir para emule?
Which ports do I have to configure in a firewall or router to run aMule?
aMule works even with no specific ports opened, but you won't get a HighID in this case. As mentioned above, to be given a HighID, port 4662 TCP (or the one set in the Preferences) must be listening (i.e. opened in your firewall and forwarded in your router).
Apart from that port, to have an optimal ED2K experience, two more ports should be enabled as well. First, the UDP port 4672 (which can also be changed to any other number in the Preferences) and secondly, the secondary UDP port which can't be set in the Preferences. This UDP port is your TCP port + 3 (e.g.: TCP=4662 then UDP=4665).
aMule works even with no specific ports opened, but you won't get a HighID in this case. As mentioned above, to be given a HighID, port 4662 TCP (or the one set in the Preferences) must be listening (i.e. opened in your firewall and forwarded in your router).
Apart from that port, to have an optimal ED2K experience, two more ports should be enabled as well. First, the UDP port 4672 (which can also be changed to any other number in the Preferences) and secondly, the secondary UDP port which can't be set in the Preferences. This UDP port is your TCP port + 3 (e.g.: TCP=4662 then UDP=4665).
# posted by Dr. Betalot : 2:31 p. m.
